How To Start HP Laptop In Safe Mode With Windows 10?

If you’ve been using Windows 10 on an HP laptop for a time you’ve probably noticed that entering Safe Mode with the F8 or SHIFT + F8 keys on your keyboard no longer work. Because the Windows 10 start procedure is now faster than ever, that strategy no longer works. That isn’t to say that Windows 10 doesn’t have a Safe Mode. It’s only that you have to go through a few steps to start hp laptop in safe mode with windows 10.

Here’s how to boot your HP laptop into Safe Mode with Windows 10:

Using Windows To Enter Safe Mode

For methods on how to enter Safe Mode in HP laptop, select your operating system and then do:

1. Search for and launch the Recovery options in Windows 10.
2. Click Restart now under Advanced startup.
3. Select Troubleshoot from the drop-down menu.
4. Select Advanced settings from the menu.
5. Next, do one of the following options, depending on your operating system:
6. Click See other recovery options in Windows 10, then click Startup Settings.
7. Press the Restart button.
8. When the computer resumes, a new Launch Settings page appears, selecting various startup choices.
9. From the Startup Settings menu, select the Safe Mode option you want:
10. Enable Safe Mode by using the F4 key. Safe Mode launches Windows with only the most basic drivers and services installed.
11. Enable Safe Mode in HP laptop with Command Prompt by pressing the F6 key. Safe Mode with Command Prompt launches Windows in a Command Prompt mode. This Mode is usually exclusively used by IT pros.
12. Use your account name and password to log in to the computer. To log on to Safe Mode, you must provide your Windows account name and password. Other modern methods, such as a Personal Identification Number (PIN) or a fingerprint reader, will not allow you to log in.
13. In Safe Mode, the computer starts up.
14. When you’ve completed troubleshooting, click Start to exit Safe Mode.
15. Select Restart after clicking Power. The computer begins to boot up regularly.

Read also: How To Install an SSD Without Reinstalling Windows?

Access Safe Mode From Outside Of Windows.

You may be requested to start in recovery mode if Windows fails to start properly. The Choose an option screen appears when this happens.

1. Shut down your computer if choose an option screen that does not appear. When your computer turns on, keep pressing the ESC key until the Startup Menu appears. Press F11 to start a System Recovery, then follow the steps below to open Windows in Safe Mode.
2. Select your keyboard layout if required, then click Troubleshoot from the options screen.
3. Select Advanced settings from the menu and then Startup Settings in the enxt. If the Startup Settings option does not appear, proceed to Enter Safe Mode without Startup Settings for instructions.
4. Press the Restart button.
5. When the computer resumes, a new Launch Settings page appears, selecting various startup choices.
6. From the Startup Settings menu, select the Safe Mode option you want:

• Enable Safe Mode by using the F4 key. Safe Mode launches Windows with only the most basic drivers and services installed.
• Enable Safe Mode in HP laptop with Networking by pressing the F5 key. Safe Mode with Networking puts Windows in Safe Mode and allows you to connect to the Internet and your local network.
• Enable Safe Mode in Windows 10 with Command Prompt by pressing the F6 key. Safe Mode with Command Prompt runs Windows in a Command Prompt window in Safe Mode. This Mode is usually exclusively used by IT pros.

7. Select your keyboard language type if requested, then sign in with an administrator-level account name. To log on in Safe Mode, you must provide your Windows account name and password. PIN or a fingerprint reader will not allow you to log in.
8. In Safe Mode, the computer displays the desktop.
9. When you’ve completed troubleshooting, click Start to exit Safe Mode.
10. Select Restart after clicking Power. The computer begins to boot up regularly.

Activate Safe Mode Without Access To The Startup Settings

The Startup Settings option may not appear in some circumstances. Using Command Prompt, start Windows in Safe Mode.

1. When your computer turns on, keep pressing the ESC key until the Startup Menu appears.
2. Press F11 to start a System Recovery. Select your keyboard layout if requested.
3. The screen “Choose an option” appears. Select Troubleshoot from the drop-down menu.
4. Select Advanced settings from the menu.
5. To open the Command Prompt window, click Command Prompt. To proceed, you may need to pick your account and enter your password.
6. Enter the command for the desired Safe Mode choice. Fill in the blanks exactly.

Enable Safe Mode – Type:

bcdedit /set {default} safeboot minimal and press Enter.

Enable Safe Mode with Networking – Type:

bcdedit /set {default} safeboot network and press Enter.

Enable Safe Mode with Command Prompt – Type:

bcdedit /set {default} safeboot minimal and press Enter, and then type:

bcdedit /set {default} safebootalternateshell yes and press Enter.

When you have input the command correctly, the message “operation completed successfully” appears.

8. Click the X in the upper right corner to close the Command Prompt window.
9. The screen “Choose an option” appears. Continue to Windows and sign in with your account name and password.
10. To log on in Safe Mode, you must provide your Windows account name and password. Another method, such as a Personal Identification Number (PIN) or a fingerprint reader, will not allow you to log in.
11. In Safe Mode, the computer displays the desktop.

Getting Out Of Safe Mode

Safe Mode can usually be exit by simply restarting your computer. When you use Command Prompt to enter Safe Mode, restarting your computer does not exit Safe Mode.

1. Turn your computer off, then on again, pressing the Esc key repeatedly until the Startup Menu appears.
2. Press F11 to start a System Recovery. Select your keyboard language type if prompted.
3. The screen “Choose an option” appears. Select Troubleshoot from the drop-down menu.
4. Select Advanced settings from the menu.
5. To open the Command Prompt window, click Command Prompt. To proceed, you may need to pick your account and enter your password.
6. Enter the command

bcdedit /deletevalue {default} safeboot and press Enter.

7. Click the X in the upper right corner to close the Command Prompt window.
8. The screen “Choose an option” appears. Continue is the option.
9. The computer begins to boot up regularly.

Read also: How To Find Large Files on Windows 10?

FAQs

How Do I Start Windows 10 In Safe Mode?

In the Run prompt, type MSConfig and press Enter. Navigate to the Boot tab and select the Safe Mode option. It should be available immediately away in Windows 10’s default mode. You must choose the Safe boot option as well as Minimal.

From A Command Prompt, How Do I Go To Safe Mode?

Use Command Prompt to start your computer in Safe Mode. Hit the F8 key on your keyboard many times throughout the computer startup process until the Windows Advanced Options menu displays, then pick Safe Mode with Command Prompt from the list and press ENTER.

How Can I Start Windows 8.1 In Safe Mode On My HP Laptop?

Safe Mode can also be enabled with a few clicks or taps on the Start screen in Windows 8 or 8.1. Press and hold the SHIFT key on your keyboard while on the Start screen. While still holding SHIFT, select the Power button, followed by the Restart option.

I Don’t Have A Power Button On My Laptop, So How Can I Turn It On?

Simultaneously press the power button and the D key on the keyboard. Use the f2 key to get to the bios screen if the power button isn’t functioning, and you can get it to turn on. There is an option to turn on with A/C there. Alternatively, turn it on after a power outage.

What Does Windows 10’S Safe Mode Do?

In Windows 10, start your computer in Safe Mode. Safe Mode begins Windows in a minimal form, with only a few files and drivers installed. If the same problem does not pop in Safe Mode, it is unlikely that default settings or basic device drivers cause the issue. To launch Settings, use the Windows logo key + I on your keyboard.

What Is The Safe Mode Command Prompt In Windows 10?

“Advanced settings -> Startup Settings -> Restart” is the path to take. Then, on your keyboard, hit the 4 or F4 key to enter minimum Safe Mode, 5 or F5 to enter “Safe Mode with Networking,” or 6 or F6 to enter “Safe Mode with Command Prompt.”