Get The Latest Technology Updates

How to Connect 3 Monitors to a Laptop Docking Station?


Created At 3 months ago

Posted By Fiza

Do you understand to know if you can use a laptop to work with numerous devices? It’s good news: you can see it now! You can attach several displays, audio devices, keyboards, mouse, printers, and other peripherals to your laptop and use them all simultaneously!

You can, on the other hand, attach a pair of monitors to your laptop, and you’ll need to connect a docking station in that scenario. Building a multi-monitor laptop arrangement with a docking station is my favorite way. Connect 3 monitors to a laptop Docking Station is a straightforward, clean, and practical way.

Docking Station:

docking station enables you to connect numerous devices to a single laptop and work with them on different tasks simultaneously. It just takes one connecting cable to connect or unplug the laptop from the docking station, and you may use your laptop to accomplish it.

The nicest thing about having a docking station is that it acts as a desktop computer while just using a laptop. The hefty setup does not need a lot of equipment. Because the laptop doesn’t take up much room, you can set up a docking station almost anyplace. You should set up a docking station with your laptop if you are obliged to or intend to work with a configuration that includes several displays.

In this post, we’ll go through how to add three monitors to your laptop and whether you should utilize your laptop’s screen as a monitor or three separate displays. The instructions are nearly the same, and the only difference is the number and type of ports you have. No matter whatever arrangement you pick, you’ll almost certainly need a dock because few laptops offer more than one connection for connecting additional displays.

Attach Displays to Your Laptop With Cables:

VGA, DVI, and HDMI are the three options. Make sure your laptop has all of these ports, as well as a display port. All of these USB wires should connect to the display port outputs. This method will allow you to attach three monitors to your laptop with ease. We’ve provided a generic approach that takes into account the most common and popular laptop combinations. As a result, if yours differ, the procedure may differ in your situation.

Method 1:

Check the specifications of your laptop’s video card to see whether it can support three displays at once. Connect the three displays to your docking station using the display port HDMI, VGA, or DVI connections if you obtain a green signal. To use the docking station, connect your laptop to it. If you’re using Windows 10, keep reading to learn how to set up your displays.

Method 2:

  • Now that you’ve set up three monitors, a docking station, and a laptop connection, you should check to see if your laptop has detected all of them.
  • If your laptop immediately recognizes the new displays, you may skip this section. Otherwise, Go to the Display Options menu.
  • Rearrange your exhibits and click on a new system from the drop-down menu.

Split Screens Between the Laptop and the Extra Monitors:

  • Click on the Right side of your laptop desktop.
  • Select the Display Options option.
  • Go to several different displays.
  • Please select the number of displays to be displayed by clicking on it
  • From the drop-down menu, click on the Extend these Displays.

Method 3:

If you wish to manage the serial number of your monitor list, follow these simple steps:

  • Click on the Right side of the system to bring up the context menu.
  • Select the Display Options option.
  • Choose how you want your displays to be rearranged.
  • To rearrange the serial and position them where you want them, left-click on your chosen display.

Setting Up The Graphics:

You can connect these three monitors to your laptop and configure their graphics. If you properly follow these procedures, your docking station will be ready for heavy-duty use without any additional or external difficulty. Take a look at the following steps:

To begin, decide where you want all of your monitors to be placed. Then precisely position the port replicator there. After you’ve placed it, you’ll need to plug in and attach the power cord to keep it functioning. Connect one end of the display port cord to the replicator after that. Connect the other end to the monitor display through the display port.

Now is the time to plug in and connect the LCD’s power cord. After that, please turn on your monitor’s display and position it where you want it the most. You’ll need to repeat these steps (steps 2 and 3) for further connectivity with the display port monitor later. You must immediately dock the portable system on the replicator after it has been completely shut off.

After that, you must immediately switch on the system. As soon as your Windows operating system boots up, you’ll see that all screens have display graphics. Right-click your desktop now. Then select Graphics Properties from the drop-down menu. Then, along with the position of the external characteristics, change the resolution. Additionally, you may change the default display to any of the available screens.

After that, attach one end of the VGA wire to the replicator. On the other hand, connect the other side of the device wire to the analog VGA monitor display. After that, connect and plug in the VGA monitor display power cord. Now, switch on the monitor and position it where you want it.

If you wish to utilize an external keyboard and mouse, connect them to the replicator at the same location where three of your displays are already linked through the analog input. This analog input is proving to be a viable replacement for your portable display system. In addition, switch off the power and close the system.

Don’t worry, and you’re nearly there. Now press the replicator’s power button. These three displays will begin to display images as soon as Windows starts up. Select the Right side of the laptop in such an instance. Then choose the graphic properties option. Finally, change the adjustment settings as well as the display’s various locations.


Finally, these simple steps will guide you through the process of setting up your laptop docking station with three external displays. You should be able to attach displays to your laptop docking station using the procedures outlined above. If you properly follow the procedures, you will be able to multitask without difficulty.

Question: What is the best way to connect three monitors to my laptop?

Answer: Right-click on the desktop in Windows 7 or Windows 8 and select Screen resolution; in Windows 10, select Display settings. It will take straight where you may customize your Windows options for multiple displays. You may check here to see if all of your monitors have been identified.

Question: What is the best way to connect three monitors to my Lenovo laptop docking station?

Answer: Connect the graphics on three external displays as well as the laptop. To begin, position the port replicator where you want the monitors to be. The power cord must then be connected and plugged in. The LCD power wire may then be connected and plugged in.

Question: Is it possible to run three displays on a laptop?

Answer: Yes. When you utilize DisplayPort technology with your Dell latitude laptop, you may use your Intel HD graphics card to drive up to three displays. You may, for example, display graphics on your laptop screen as well as two external displays. Alternatively, you can use three external displays.

Latest Posts

Amazon Affiliate Disclosure

As an Amazon Associate, I earn from qualifying purchases.

Some posts may contain affiliate links. is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to Amazon(.com,, .ca etc) and any other website that may be affiliated with Amazon Service LLC Associates Program.